Police Officer
A fit police officer in her 30s with medium brown skin and her hair in a tight low bun, wearing a navy peaked cap, a pale-blue short-sleeve uniform shirt with navy epaulettes, a soot-black duty belt with a steel buckle, navy trousers and polished black boots, with a small notebook in her right hand. She is low-poly and rigged in T-pose on the library's shared Mixamo-named skeleton.

Left rail: colours and the 4 knobs the agent wrote into this model — they rebuild the geometry and go into your download. Bottom: actions for the rigged character — the one you pick plays here and is baked into the download. Right rail: looks for the viewer. Drag to orbit, scroll to zoom. On a desktop, Open in 1DesignTool turns it into a project you can keep editing with your agent.
- Triangles
- 3,382
- Vertices
- 14,004
- Meshes · materials
- 11 · 11
- Size (W × H × D)
- 1.6 m × 1.7 m × 34 cm
- File
- GLB · 528 KB
- Animation
- Static
- Style
- Low-poly
- Collection
- Police Station
Palette · named materials
- skin#7a4b30
- hair#241a16
- hat#1c2a54
- top#7e9fce
- epaulettes#1c2a54
- accent#1b1b22
- trim#7e8c9a
- bottoms#1c2a54
- shoes#1b1b22
- prop#26262d
- paper#efe9da
Use it
import { GLTFLoader } from "three/addons/loaders/GLTFLoader.js";
const gltf = await new GLTFLoader().loadAsync(
"https://assets.stoicsoft.com/1designtool/3d/models/police-station-officer/742577d98d/model.glb"
);
scene.add(gltf.scene); // metres, +Y up, front faces +ZHow it was made
The brief given to 1DesignTool's “3D object” template:
A fit woman in her 30s with medium brown skin, about 1.69 m tall, with her hair in a tight low bun. Approachable, alert expression. Wearing a navy peaked cap, a pale-blue short-sleeve uniform shirt with navy epaulettes, a soot-black duty belt with a steel buckle, navy trousers and polished black boots. Palette (Police Station kit, use these exact hex values for the named colours): navy #1c2a54, pale blue #7e9fce, soot black #1b1b22, steel #7e8c9a. Holding a small plain notebook in the right hand. Low-poly style, matching the kit's flat-shaded parts. No text, logos, brand names or lettering anywhere.
- Agent: Claude Code · Claude Opus 5.5 in 1DesignTool
- Direction: Low-poly · family characters
- three-check PASS · glb-lint PASS
Named parts · 8
- Body (medium brown skin)
- Dark hair scraped back into a tight low bun, brows and eyes
- Navy peaked cap
- Pale-blue short-sleeve uniform shirt with navy epaulettes and chest pockets
- Soot-black duty belt with a steel buckle and pouches
- Navy uniform trousers
- Polished black boots
- Small plain notebook
Note: 3,382 triangles in 8 skinned meshes (11 primitives) with 11 flat-shaded materials named by role. The duty belt's material is called accent and the steel buckle's is called trim. There are no textures and no animation clips. The rig is one 25-bone skeleton with Mixamo names. mixamorig:Hips is the root and sits under the model root. three.js drops the colon when it loads the names (mixamorigHips). There are no finger bones. The hands are mittens with a thumb, and the right hand is a fist, so only the …Hand bones exist. The bones have identity rest rotations (world-aligned axes, not Mixamo's own bone roll), so retarget Mixamo clips by bone name (Blender, Unity Humanoid, Godot retarget, three.js SkeletonUtils) rather than copying raw local rotations. GLTFExporter writes one glTF skin per mesh, but all 8 skins list the same 25 joints with identical inverse bind matrices, so they load onto one shared set of bones. The notebook is its own mesh, weighted 100% to mixamorig:RightHand. Its top edge is gripped in the fist and the rest hangs below, tipped 18° forward, with the cream page edges showing at the front and foot. In the rig-test pose it ends up held flat in front of her, as if she is taking notes. The rig test measured 6e-8 m of drift in hand space. The cap, hair, bun, brows and eyes are weighted 100% to Head. The navy epaulettes are laid on the shoulders by ray-casting onto the shirt, and each point takes the weights of the shirt facet under it, so they ride the shoulder. The shirt, the trouser waist and the duty belt share one torso weight field. Each pouch is rigid with the belt at its own centre. Each vertex has at most 4 normalised influences, with short blend bands at the neck, shoulders, elbows, wrists, hips, knees and ankles. The boot collar and the trouser hem share one ankle ramp. Rig test pose (arms down 70°, forearms bent 90°, left thigh forward 45°, Spine1 twisted 20°): no seams open and no facets collapse or fold. The tucked shirt stays inside the trousers, the trouser waist and shirt stay under the belt, and the boot shafts stay under the trouser hems. These layers also hold through a stride, a 70° high step, a thigh swung back 30° and an 85° sit. All of the above also passes on exports at the parameter extremes (1.60 m slim, 1.80 m sturdy, and with the cap and notebook off). A back-face audit finds at most 23 stray edge pixels per view. The armpit (sleeve against the torso side) was only checked by eye; arms held tight to the body were not tested. Height is 1.69 m to the HeadTop_End joint (the top of the head). The cap adds about 3 cm, so the model's bounding box is 1.72 m tall. With the cap off, the sleek hair runs to the crown. The Low-poly style allows no mouth or nose, so the approachable, alert look comes from open almond eyes, softly raised brows and gently lifted cheekbones. At full-body thumbnail size the eyes are only a few pixels. The style also sets metalness to 0, so the steel buckle is matte and reads by its colour. There is no cap badge, no lettering and no weapon or holster. The belt carries closed pouches only. glb-lint reports 0 errors and 2 warnings. One is 11 materials against the direction's default of 10, recorded as a plan override: navy is three roles (cap, epaulettes, trousers) on three meshes because the exporter writes one material per mesh, and the notebook needs a cover and a page block. The other is intended nesting of the clothing layers. With glb-requirements.json the verdict is PASS. The bare command without a contract reports UNVERIFIED, also with 0 errors. The preview renders at exposure 0.62, a recorded plan override, so the pale blue does not wash toward white. The exported materials carry the exact kit hex values. Params: height scales the whole rig and keeps the soles at y = 0. Build changes girth and keeps every layer's rest clearance (scripts/param-probe.mjs). Cap and notebook switch those meshes on or off.
About the Police Officer 3D model
Police Officer is a free low-poly 3D model from the Police Station set, rigged with a 25-bone Mixamo-compatible skeleton. It measures 1.6 m × 1.7 m × 34 cm (W × H × D) at real-world scale and is built from 3,382 triangles across 11 meshes, with 8 named parts. Download the 528 KB GLB and drop it into three.js, React Three Fiber, Godot or Blender — free for commercial use, no attribution required.
- Is the Police Officer 3D model free for commercial use?
- Yes. It is free under the 1DesignTool 3D library license: use it in personal and commercial work — games, apps, websites, renders, ads and client projects — and modify it as you like, with no credit required. What you can't do is re-sell or re-distribute the file on its own or inside a model pack.
- What file format is it, and how big is it?
- A single binary glTF 2.0 file (.glb), 528 KB: 3,382 triangles, 14,004 vertices and 11 materials, modelled in metres at 1.6 m × 1.7 m × 34 cm.
- Is Police Officer animated?
- It ships without a baked clip, in its bind pose. It is rigged with a 25-bone Mixamo-compatible skeleton, so it takes retargeted animation.
- Which engines and tools can open it?
- Anything that reads glTF 2.0. three.js, React Three Fiber, Babylon.js, Godot 4 and Blender import the GLB directly; Unity and Unreal Engine load it through their glTF importers. The snippets above show the exact code for three.js, React Three Fiber, Godot and Blender.
- How was the Police Officer 3D model made?
- Claude Code (Claude Opus 5.5) generated it inside 1DesignTool's 3D template from a written brief, then the design kit's checks verified the geometry and the GLB before it was published. You can make your own the same way with 1DesignTool.
More like this
All of Police Station →
Interview Room Suspect
Police Station3,282 tris

Patrol car
Police Station2,284 tris

Cell door
Police Station1,648 tris

Garage barrier
Police Station960 tris

Motorbike
Police Station3,012 tris

Notice boards
Police Station2,090 tris

Barriers
Police Station2,088 tris

Coffee machine
Police Station1,768 tris
Free under the 1DesignTool 3D library license. Model #54 of 2361.