FREEcommercial use · no sign-up

Adult in Bathrobe

A tall, heavy-set, balding man in his 50s with a bushy salt-and-pepper beard and sleepy, contented eyes. He wears a fluffy knee-length mint bathrobe tied with a mint-dark belt, has a white towel round his neck and soft-grey slippers on his feet, and holds a plain white mug in his right hand. He's low-poly and rigged on the library's shared Mixamo-named skeleton in a T-pose, ready for retargeted clips.

Adult in Bathrobe 3D model

Left rail: colours and the 4 knobs the agent wrote into this model — they rebuild the geometry and go into your download. Bottom: actions for the rigged character — the one you pick plays here and is baked into the download. Right rail: looks for the viewer. Drag to orbit, scroll to zoom. On a desktop, Open in 1DesignTool turns it into a project you can keep editing with your agent.

Triangles
3,746
Vertices
18,108
Meshes · materials
11 · 11
Size (W × H × D)
1.8 m × 1.8 m × 54 cm
File
GLB · 582 KB
Animation
Static

Palette · named materials

  • skin#d39b7a
  • cheek#c97862
  • eyes#2b211d
  • hair#5a544f
  • hair-grey#aaa59e
  • top#90d5b3
  • accent#59c08c
  • towel#f4f1ec
  • bottoms#999999
  • shoes#999999
  • prop#f4f1ec

Use it

import { GLTFLoader } from "three/addons/loaders/GLTFLoader.js";

const gltf = await new GLTFLoader().loadAsync(
  "https://assets.stoicsoft.com/1designtool/3d/models/bathroom-and-laundry-adult-in-robe/4d919ef7e5/model.glb"
);
scene.add(gltf.scene); // metres, +Y up, front faces +Z

How it was made

The brief given to 1DesignTool's “3D object” template:

A tall, heavy-set man in his 50s, about 1.80 m tall, with a balding head and a bushy salt-and-pepper beard. Sleepy, contented expression. Wearing a fluffy mint bathrobe to the knee tied with a mint-dark belt, a white towel round the neck and soft-grey slippers. Palette (Bathroom and Laundry kit, use these exact hex values for the named colours): mint #90d5b3, mint dark #59c08c, white #f4f1ec, soft grey #999999. Holding a plain white mug in the right hand. Low-poly style, matching the kit's flat-shaded parts. No text, logos, brand names or lettering anywhere.
  • Agent: Claude Code · Claude Opus 5.5 in 1DesignTool
  • Direction: Low-poly · family characters
  • three-check PASS · glb-lint PASS
Make your own with 1DesignTool →

Named parts · 8

  • Body (skin with the bald crown, bare shins, chest in the V, sleepy eyes)
  • Salt-and-pepper fringe, brows and bushy beard
  • Fluffy knee-length mint bathrobe with shawl lapels, pockets and rolled cuffs
  • Mint-dark tie belt with knot and tails
  • White towel round the neck
  • Soft-grey boxer shorts under the robe
  • Soft-grey plush slippers
  • Plain white mug

Note: 3,746 triangles in 8 skinned meshes (11 primitives), with 11 flat-shaded materials named by role. There are no textures and no animation clips. The salt-and-pepper is modelled, not textured: whole columns of fringe, brow and beard facets take a flat light-grey role as broken streaks, greyest at the temples and the chin. The rig is one 25-bone skeleton with Mixamo names. mixamorig:Hips is the root and sits under the model root; three.js loads the names without the colon (mixamorigHips). There are no finger bones: the hands are mittens with a thumb (the right hand is a fist), so only the …Hand bones exist. Bones have identity rest rotations (world-aligned axes, not Mixamo's own bone roll), so retarget Mixamo clips by bone name (Blender, Unity Humanoid, Godot retarget, three.js SkeletonUtils) rather than copying raw local rotations. GLTFExporter writes one glTF skin per mesh, but all 8 skins list the same 25 joints with identical inverse bind matrices, so they load onto one shared set of bones. The mug is its own mesh, weighted 100% to mixamorig:RightHand. Its handle runs front to back through the fist and the mug hangs below with its rim tipped 20° up. In the T-pose it therefore lies on its side, and once the forearm bends forward it stands upright, rim up. The rig test measured 9e-8 m of drift in hand space. The mug is empty. The head, fringe, brows and beard are 100% Head. The towel rides Spine2 and the shoulders, with at most about 10% Neck at the nape, so it stays on the shoulders when the head turns. Each vertex has at most 4 normalised influences, with short blend bands at the neck, shoulders, elbows, wrists, hips, knees and ankles. Below the belt the robe skirt is two panels split at the centre front under the wrap band. At the back there's a vent below the seat, where the left panel laps over the right. Each panel follows its own thigh, at half strength toward the back, so a raised knee lifts one panel and opens the robe instead of stretching it; the robe material is double-sided for that reason. Soft-grey boxer shorts under the robe keep a stride decent. The belt knot and its two tails sit on the right hip and follow the right panel. Rig test pose (arms down 70°, forearms bent 90°, left thigh forward 45°, Spine1 twisted 20°): no seams open, 0.43% of facets collapse and 1.01% fold (36 of the 38 folded facets are in the robe). The shorts and bare shins stay under the robe, the robe stays under the belt and under the towel, and a stride and a thigh swung back 30° are also clean. Known limits: in a 70° high step, 1 vertex of the boxer shorts passes through the robe, and in an 85° sit, 8 do; in a sit the front panels also lift flat with the thighs. For sitting or high kicks, add a corrective or cloth simulation. Height is 1.80 m to the top of the bald crown, and the HeadTop_End joint sits 1 cm above it. The low-poly style allows no mouth: the sleepy, contented look comes from heavy upper lids lying almost flat over downward-curving eye slits that droop at the outer corners, relaxed brows, full rosy cheeks and a round ruddy nose, and the heavy moustache and beard cover the mouth. glb-lint reports 0 errors and 2 warnings. One is 11 materials against the direction's default of 10, recorded as a plan override because the beard's salt, the rosy cheeks, the towel and the mug each need their own role. The other is intended nesting (body under clothes, hair on the head). With glb-requirements.json the verdict is PASS. The preview renders at exposure 0.62 (also a recorded override), so the pale kit mint and white don't wash out; the exported materials carry the exact kit hex values with metalness 0. Params: height scales the whole rig and keeps the soles at y = 0. Build changes girth and belly, and the layers keep their clearance across its range. Salt sets how much of the hair and beard is grey (0 is dark, 1 is nearly white), and mug switches the mug on or off.

About the Adult in Bathrobe 3D model

Adult in Bathrobe is a free low-poly 3D model from the Bathroom and Laundry set, rigged with a 25-bone Mixamo-compatible skeleton. It measures 1.8 m × 1.8 m × 54 cm (W × H × D) at real-world scale and is built from 3,746 triangles across 11 meshes, with 8 named parts. Download the 582 KB GLB and drop it into three.js, React Three Fiber, Godot or Blender — free for commercial use, no attribution required.

Is the Adult in Bathrobe 3D model free for commercial use?
Yes. It is free under the 1DesignTool 3D library license: use it in personal and commercial work — games, apps, websites, renders, ads and client projects — and modify it as you like, with no credit required. What you can't do is re-sell or re-distribute the file on its own or inside a model pack.
What file format is it, and how big is it?
A single binary glTF 2.0 file (.glb), 582 KB: 3,746 triangles, 18,108 vertices and 11 materials, modelled in metres at 1.8 m × 1.8 m × 54 cm.
Is Adult in Bathrobe animated?
It ships without a baked clip, in its bind pose. It is rigged with a 25-bone Mixamo-compatible skeleton, so it takes retargeted animation.
Which engines and tools can open it?
Anything that reads glTF 2.0. three.js, React Three Fiber, Babylon.js, Godot 4 and Blender import the GLB directly; Unity and Unreal Engine load it through their glTF importers. The snippets above show the exact code for three.js, React Three Fiber, Godot and Blender.
How was the Adult in Bathrobe 3D model made?
Claude Code (Claude Opus 5.5) generated it inside 1DesignTool's 3D template from a written brief, then the design kit's checks verified the geometry and the GLB before it was published. You can make your own the same way with 1DesignTool.

Free under the 1DesignTool 3D library license. Model #120 of 2361.